Plan your Master conversion in 3D
The Renault Master is in the planner in both generations: the 2010–2024 model, identical to the Nissan NV400 and Opel Movano B, and the new Master from 2024. Put in a transverse bed, kitchen and bathroom and see straight away what fits and what clashes.
Trial: 1 design in a set van · no payment details · doesn’t renew
- 2 generations · 12 variants
- 15 layout templates
- Right in your browser
Load space 3,733 × 1,765 × 1,894 mmDrag to rotateExample: Master (2010–2024) L3H2 · Bunk beds + half dinette + bathroom- 12variants with factory dimensions
- 15ready-made layouts
- 90+item types
- 7days free trial
This is your Master
With the sliding door open and the awning out, the view through the door, in the evening with the lights on, at night from above – and with the exterior dimensions. All pictures come straight from the planner.
By day
Master (2010–2024) L3H2 with “Bunk beds + half dinette + bathroom”: sliding door open, awning out.
Through the sliding door
The first look inside – this is how your layout feels when you stand in front of the van.
In the evening
The same view with the lights on – cosy before you’ve laid a single cable.
Light throughout the van
All lights on – so you can see where it gets bright and where it stays dark.
Night mode
From above: beds and benches folded out, ready for the night.
6.20 m2.48 mExterior dimensions
Master (2010–2024) L3H2: 6.20 m long and 2.48 m high. Load space 3,733 × 1,765 × 1,894 mm.
By day
Master (from 2024) L4H3 with “Twin single beds”: sliding door open, awning out.
Through the sliding door
The first look inside – this is how your layout feels when you stand in front of the van.
In the evening
The same view with the lights on – cosy before you’ve laid a single cable.
Light throughout the van
All lights on – so you can see where it gets bright and where it stays dark.
Night mode
From above: beds and benches folded out, ready for the night.
7.08 m2.78 mExterior dimensions
Master (from 2024) L4H3: 7.08 m long and 2.78 m high. Load space 4,493 × 1,789 × 2,023 mm.
Power, water and weight for your Master
The planner calculates your whole conversion, not just the furniture – and at the end you know exactly what to buy. Power, water, insulation and axle loads are included in Monthly and the Project Pass, the shopping lists (build kits) in the Project Pass.
Plan your power
Enter your appliances – cool box, lights, heater, laptop. The planner works out your daily consumption, how long your leisure battery lasts and how quickly solar, the alternator and shore power recharge it. Plus cable size and fuse for every circuit.
Plan your water
Tank, pump and boiler: the planner shows how many litres you need per day, how long your tank lasts and how much hot water the boiler delivers – including pipe lengths to every tap.
Weight and axle loads
Every item brings its weight to its spot. The planner spreads everything over the front and rear axle, also with full tanks and passengers, and warns you before your Master gets too heavy.
Shopping lists for your Master
Your design becomes a ready-made shopping list: the power kit (battery, chargers, fuses, cables in the right size and length), the water kit (tank, pump, boiler, pipes, taps), the cutting kit (wood and boards with cutting plan and cut list) and the insulation kit (insulation per surface in whole rolls and boards, adhesive and tape) – made for your Master. Tick off, share or take along as PDF and CSV.
Insulation
Material and thickness for roof, walls, doors, floor and wheel arches – or a ready-made package: Summer, Four seasons or Winter sports. The planner calculates the heat loss, checks whether your heater is up to it and where condensation can form, and shows the manufacturer’s installation guideline for your Master.
GasSoon
Plan the gas bottle, hob and gas heater safely, with everything you need for it. Coming soon – also with a shopping list.
Ready-made layouts for your Master
Pick a template and the planner fits all the furniture into your Master. You can then rearrange any template freely.
Master (2010–2024) L3H2Twin single beds
Two single beds along the sides with a walkway between them, garage underneath.
Master (2010–2024) L3H2Rock and roll bed
Bench seat at the rear that folds flat into a bed at night (rock and roll bed), kitchen along the left wall. For compact and low-roof vans.
Master (2010–2024) L3H2Bunk beds + half dinette + bathroom
Two transverse beds stacked at the rear, ideal for children, with a half dinette, bathroom and a kitchen by the sliding door.
Master (2010–2024) L3H2Garage bed with slatted base + workspace
Garage at the rear with a slatted base that slides forward at night and then rests on a height-adjustable table, and on the worktop where possible. By day that table is your workspace, with an L-shaped bench or benches around it.
Master (2010–2024) L3H2Side benches with pedestal table
Two ochre velvet benches facing each other with a pedestal table in between. By day a walkway to the rear doors, at night one bed across the full width. Open shelves on the rear doors.
Master (from 2024) L2H2Transverse bed + kitchen + seating
Fixed transverse bed at the rear with a garage underneath, kitchen along the left wall, swivel seat and table.
Master (from 2024) L2H2Transverse bed + bathroom
Transverse bed at the rear, wet room with toilet in front of it, kitchen and seating up front.
Master (from 2024) L2H2French bed (lengthways)
Lengthways double bed at the rear on the left, walkway on the right, kitchen up front.
Master (from 2024) L2H2Transverse bed + L-bench
Fixed transverse bed plus an L-shaped bench that becomes a second bed, using the table as a support.
Master (from 2024) L3H2Transverse bed + half dinette + bathroom
The classic campervan layout: half dinette behind the driver, bathroom on the left, kitchen on the right behind the sliding door and a transverse bed at the rear.
Master (2010–2024) L4H3Single beds + half dinette + bathroom
Two single beds at the rear with a garage underneath, half dinette up front, bathroom on the left and kitchen on the right. For long vans.
Master (from 2024) L2H2Pull-out transverse bed + bathroom
A narrow transverse bed that pulls out into a double at night, so you have more living space by day. Bathroom up front, kitchen on the left.
Master (from 2024) L2H2Workspace: seating + transverse bed + toilet
For working on the road: seating area with table and laptop, kitchen, toilet cubicle and a fixed transverse bed. In a longer van a bench faces the swivel seats.
Master (from 2024) L2H2Lounge on a platform
Platform with drawers at the rear over the wheel arches, with an L-bench on top that becomes a transverse bed at night. Kitchen with tiled splashback and an open shelf unit, and a step up to the platform.
Master (from 2024) L2H2Felt lounge
U-shaped bench at the rear with felt-covered seat boxes and sage green cushions, which becomes one large bed at night using the table. Kitchen on the left, wooden ceiling, shiplap wall and a loose seat box.
What matters in a Master
Four questions that come up in almost every Master conversion, answered by the planner before you buy materials.
Does a transverse bed fit?
The load space is 1,765 mm wide, 1,789 mm in the new Master. The planner uses 18 mm battens plus 12 mm cladding boards on the walls; at the ends, the bed rests directly against the battens. That leaves about 1.73 m in between, just over 1.75 m in the new Master. The transverse bed templates need at least 1.75 m: they just fit in the new Master, but not in the Master up to 2024. There you sleep crosswise in the bunk beds for children (1.60 m is enough) or in the garage bed with slatted base. Building differently? Enter your wall build-up and the planner recalculates.
Which length?
In the Master up to 2024, the L2 mainly suits compact layouts such as the rock and roll bed; single beds and bunk beds need at least the L3. In the new Master most templates already fit in the L2H2, including the transverse bed with bathroom.
Front- or rear-wheel drive?
In the planner the variant determines the drive: L4 with rear-wheel drive, the others with front-wheel drive. With front-wheel drive the planner warns you when there is too little weight on the front axle, and with every variant before an axle is overloaded. The axle load calculation is included in Monthly and the Project Pass.
NV400, Movano and Interstar
The 2010–2024 Master is identical to the Nissan NV400 and Opel Movano B, the new Master to the Nissan Interstar. In the planner you simply choose the matching Master (the Interstar is also available as a separate model): dimensions and templates are the same.
Three steps to your layout
Everything runs in your browser – nothing to install. You create an account and try it free for 7 days.
Choose your Master
Choose your variant (with Monthly or the Project Pass) and enter your wall build-up. The planner then works with the net interior dimensions – not the bare metal.
Build your layout
Start from a template or drag items in: beds, kitchen, bathroom, water tank, battery, heater and more – over 90 item types, every dimension to the millimetre.
Check and save
Collisions turn red and your design is saved automatically. Weight, axle loads and exporting the parts list come with Monthly or the Project Pass.
All Master models with factory dimensions
Load space, wheelbase and overall length come from the manufacturer’s specifications. Click “Open” and the variant starts straight away in the planner.
Renault Master (2010–2024)
Model year 2010–2024 · also Nissan NV400 and Opel Movano B · L4 with rear-wheel drive · load space width 1,765 mm · width between the wheel arches 1,380 mm · sliding door width 1,270 mm
| Variant | Load length | Load height | Wheelbase | Overall length | |
|---|---|---|---|---|---|
| L1H1 | 2,583 mm | 1,700 mm | 3,182 mm | 5.05 m | Open → |
| L1H2 | 2,583 mm | 1,894 mm | 3,182 mm | 5.05 m | Open → |
| L2H2 | 3,083 mm | 1,894 mm | 3,682 mm | 5.55 m | Open → |
| L2H3 | 3,083 mm | 2,144 mm | 3,682 mm | 5.55 m | Open → |
| L3H2 | 3,733 mm | 1,894 mm | 4,332 mm | 6.20 m | Open → |
| L3H3 | 3,733 mm | 2,144 mm | 4,332 mm | 6.20 m | Open → |
| L4H2 | 4,383 mm | 1,794 mm | 4,332 mm | 6.85 m | Open → |
| L4H3 | 4,383 mm | 2,044 mm | 4,332 mm | 6.85 m | Open → |
Renault Master (from 2024)
Model year from 2024 · L4 with rear-wheel drive · load space width 1,789 mm · width between the wheel arches 1,380 mm · sliding door width 1,312 mm
| Variant | Load length | Load height | Wheelbase | Overall length | |
|---|---|---|---|---|---|
| L2H2 | 3,225 mm | 1,885 mm | 3,585 mm | 5.68 m | Open → |
| L3H2 | 3,855 mm | 1,885 mm | 4,215 mm | 6.32 m | Open → |
| L3H3 | 3,855 mm | 2,138 mm | 4,215 mm | 6.32 m | Open → |
| L4H3 | 4,493 mm | 2,023 mm | 4,215 mm | 7.08 m | Open → |
Frequently asked questions
Does the planner work for the NV400, Movano and Interstar too?
Yes. The Nissan NV400 and Opel Movano B correspond to the 2010–2024 Master, the Nissan Interstar to the new Master from 2024. In the planner, choose the matching Master in your length and height; you’ll also find the Interstar there as a separate model.
What does the planner cost?
You try it free for 7 days, without payment details: one design in a set van, with all parts and templates, collision checks and day/night. After that the trial ends by itself: no subscription keeps running and you can still view your design. More designs, a different van or variant, the power and axle load calculations and the export come with Monthly (€7.99 per month, cancel any month) or the Project Pass (€39.99 one-off, 12 months of access). Prices include VAT.
How accurate are the dimensions?
Load space, wheelbase and exterior dimensions come from the manufacturer’s specifications, as do the door dimensions where known. The position and size of the wheel arches and the shape of the side walls, which slope inwards towards the top, are estimates that you can adjust in the planner. Always measure your own van before cutting anything.
Does it work on a phone?
Yes. You drag items with one finger, rotate the view with one finger on an empty spot and zoom with two fingers. For fine-tuning dimensions a laptop is more comfortable, though.
Does the planner replace a vehicle inspection?
No. The planner helps you plan and check, but it does not replace professional advice on the construction, an inspection or approval by your vehicle authority (such as the RDW in the Netherlands or TÜV and DEKRA in Germany), or measuring your own van.
Your Master is ready and waiting in 3D
Trial: 1 design in a set van · no payment details · doesn’t renew · right in your browser