Fiat Ducato · Citroën Jumper · Peugeot Boxer

Plan your Ducato conversion in 3D

The Ducato is the classic panel van for a camper conversion. You’ll find it in the planner, along with the Jumper and Boxer, in all eight variants from L1H1 to L4H3. Put in a transverse bed, kitchen and bathroom and see straight away what fits and what clashes.

Your van:

Trial: 1 design in a set van · no payment details · doesn’t renew

  • 8 variants · L1H1 to L4H3
  • 15 layout templates
  • Right in your browser
3D view: Ducato L2H2 with “Transverse bed + kitchen + seating”
Load space 3,120 × 1,870 × 1,932 mmDrag to rotateExample: Ducato L2H2 · Transverse bed + kitchen + seating
Ducato in detail

This is your Ducato

With the sliding door open and the awning out, the view through the door, in the evening with the lights on, at night from above – and with the exterior dimensions. All pictures come straight from the planner.

Your van:
Ducato L2H2 with the sliding door open and the awning rolled out

By day

Ducato L2H2 with “Transverse bed + kitchen + seating”: sliding door open, awning out.

View through the open sliding door into the Ducato L2H2

Through the sliding door

The first look inside – this is how your layout feels when you stand in front of the van.

View through the open sliding door in the evening, with the lights on

In the evening

The same view with the lights on – cosy before you’ve laid a single cable.

Ducato L2H2 in the evening with the lights on

Light throughout the van

All lights on – so you can see where it gets bright and where it stays dark.

Ducato L2H2 from above in night mode

Night mode

From above: beds and benches folded out, ready for the night.

Ducato L2H2 from the side5.41 m2.52 m

Exterior dimensions

Ducato L2H2: 5.41 m long and 2.52 m high. Load space 3,120 × 1,870 × 1,932 mm.

Try it free for 7 days

More than a layout

Power, water and weight for your Ducato

The planner calculates your whole conversion, not just the furniture – and at the end you know exactly what to buy. Power, water, insulation and axle loads are included in Monthly and the Project Pass, the shopping lists (build kits) in the Project Pass.

Try it free for 7 days

Layout ideas

Ready-made layouts for your Ducato

Pick a template and the planner fits all the furniture into your Ducato. You can then rearrange any template freely.

Ducato conversion

What matters in a Ducato

The Ducato has its own strengths and a few pitfalls. The planner knows both.

Wide enough for a transverse bed

With a load space width of 1,870 mm, the Ducato is wider than the Sprinter, Crafter or Transit. By default the planner uses a 30 mm wall build-up per side: 18 mm battens plus 12 mm cladding boards. Behind the head and foot of the bed it leaves the cladding out, which leaves about 1.83 m for a transverse bed. Enter your own wall build-up and the planner shows what is really left.

Front-wheel drive: weight to the front

The Ducato is driven by its front wheels. If the water tank, battery and a full garage sit too far back, the front loses traction. The planner spreads every item over the axles and warns you when the front axle gets too light. The axle load calculation is included in Monthly and the Project Pass.

L2H2 or L3H2?

The L2H2 is 5.41 m long and fits in almost any parking space. In the L3H2, just under 6 m long, you have far more layouts to choose from, including the half dinette with bathroom and the bunk beds. Compare both before you buy a van.

Jumper, Boxer and co.

The Citroën Jumper and Peugeot Boxer have the same load space as the Ducato, as do the Opel Movano from 2021 and the Toyota Proace Max. In the planner you simply choose your model: dimensions and templates are identical.

How it works

Three steps to your layout

Everything runs in your browser – nothing to install. You create an account and try it free for 7 days.

  1. Choose your Ducato

    Choose your variant (with Monthly or the Project Pass) and enter your wall build-up. The planner then works with the net interior dimensions – not the bare metal.

  2. Build your layout

    Start from a template or drag items in: beds, kitchen, bathroom, water tank, battery, heater and more – over 90 item types, every dimension to the millimetre.

  3. Check and save

    Collisions turn red and your design is saved automatically. Weight, axle loads and exporting the parts list come with Monthly or the Project Pass.

Try it free for 7 days

Factory dimensions

All Ducato variants with factory dimensions

Load space, wheelbase and overall length come from the manufacturer’s specifications. Click “Open” and the variant starts straight away in the planner. The same applies to the Citroën Jumper and Peugeot Boxer.

Model year from 2014 · load space width 1,870 mm · width between the wheel arches 1,422 mm · sliding door width 1,250 mm (L1: 1,075 mm)

VariantLoad lengthLoad heightWheelbaseOverall lengthIn the planner
L1H12,670 mm1,662 mm3,000 mm4.96 mOpen →
L1H22,670 mm1,932 mm3,000 mm4.96 mOpen →
L2H13,120 mm1,662 mm3,450 mm5.41 mOpen →
L2H23,120 mm1,932 mm3,450 mm5.41 mOpen →
L3H23,705 mm1,932 mm4,035 mm6.00 mOpen →
L3H33,705 mm2,172 mm4,035 mm6.00 mOpen →
L4H24,070 mm1,932 mm4,035 mm6.36 mOpen →
L4H34,070 mm2,172 mm4,035 mm6.36 mOpen →
Questions

Frequently asked questions

Does the planner work for the Jumper and Boxer too?

Yes. The Citroën Jumper and Peugeot Boxer are identical to the Ducato and are available in the planner as separate models, with the same dimensions and templates.

Which model years does the planner cover?

The planner has the Ducato from model year 2014. If you have an older model, quickly compare the load space dimensions or enter your own measurements via “Custom dimensions”.

What does the planner cost?

You try it free for 7 days, without payment details: one design in a set van, with all parts and templates, collision checks and day/night. After that the trial ends by itself: no subscription keeps running and you can still view your design. More designs, a different van or variant, the power and axle load calculations and the export come with Monthly (€7.99 per month, cancel any month) or the Project Pass (€39.99 one-off, 12 months of access). Prices include VAT.

How accurate are the dimensions?

Load space, wheelbase and exterior dimensions come from the manufacturer’s specifications, as do the door dimensions where known. The position and size of the wheel arches and the shape of the side walls, which slope inwards towards the top, are estimates that you can adjust in the planner. Always measure your own van before cutting anything.

Does it work on a phone?

Yes. You drag items with one finger, rotate the view with one finger on an empty spot and zoom with two fingers. For fine-tuning dimensions a laptop is more comfortable, though.

Does the planner replace a vehicle inspection?

No. The planner helps you plan and check, but it does not replace professional advice on the construction, an inspection or approval by your vehicle authority (such as the RDW in the Netherlands or TÜV and DEKRA in Germany), or measuring your own van.

Your Ducato is ready and waiting in 3D

Trial: 1 design in a set van · no payment details · doesn’t renew · right in your browser

Try it free for 7 days

Different van?